Call settings
Send my caller ID
—Select
Yes
or
No
to set your phone to
be seen or hidden from the person you are calling.
Otherwise, the value may be set by your service provider
when you subscribe to the network service.
Set by
network
is displayed.
Call waiting
—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. To check whether the
function is active, select
Check status
. To set the function
on or off, select
Activate
or
Cancel
.
Reject call with SMS
—Select
Yes
to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or reject a call’, p. 63.
Message text
—Write text to be sent in a text message
when you reject a call.
Image in video call
—You can deny video sending when
you receive a video call. Select a still image to be displayed
instead of video.
Automatic redial
—Select
On
, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press .
Summary after call
—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
Speed dialling
—Select
On
, and the numbers assigned to
the speed dialing keys (
–
) can be dialed by
pressing and holding the key. See also ‘Speed dial a phone
number’, p. 58.
Anykey answer
—Select
On
. To answer an incoming call
briefly press any keypad key, except
,
,
, and
.
Line in use
—This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select
Line 2
and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected,
is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
Tools
106
Line change
—To prevent line selection (network service),
select
Disable
if supported by your SIM card. To change
this setting, you need the PIN2 code.